Transport pipe SAFELY on float trailers

Made in the USA

ABOUT

Pipe Chocks is family owned and operated since 2015. Pipe Chocks manufactures, sells and specializes in one product, Pipe Chocks. Pipe Chocks’ are, and will always be, proudly made in the USA.

Pipe Chocks’ product engineering and manufacturing is composed of superior materials compared to the current wood and plastic wedges being used to haul pipe on float trailers today.

All of Pipe Chocks’ product is manufactured with domestic A514(T-1) Carbon Steel, all parts are precision water-jet cut and assembled by an AWS certified welder.

Pipe Chocks excels in the areas of quality manufacturing and exceeds safety standards that exist in the current pipe chock market.

VIDEO

Pipe Chocks’ product is reusable and made to withstand the heavy use that the pipeline industry can offer. Pipe Chocks is pushing the standardization of pipe hauling safety to a new high that everyone can benefit from.

 By increasing the safety and well-being of workers and by-standers, and greatly reducing the risk of damages to materials, Pipe Chocks, LLC looks to ensure peace of mind through safety on the job-site.

INSTRUCTIONS

How to use Pipe Chocks:

On a float trailer: Pipe Chocks are inserted on both sides around a standard beam of wood on which the pipe being loaded will sit on. The Pipe Chocks’ width is adjusted to the pipe width as the pipe is being lowered onto the wooden beams, based on the width of the pipes contact points with the Pipe Chocks. The Pipe Chocks are then secured with two duplex nails (per Pipe Chock) in the respective duplex nail holders.

As recommended, 4 Pipe Chocks minimum per trailer. Pipe Chocks’ must be used with sturdy 4” x 6” skids or one piece of 4” x 6” dunnage. Always secure pipe chock with duplex nails.

Pipe Chocks, LLC is not responsible for accident or injury with the use or transportation of this product. Proper load securing guidelines provided by US DOT must be followed and are the responsibility of the user or purchaser of this product. Pipe Chocks, LLC is not responsible and shall have no liability in the event of loss of property, life or injury in the use of this product.

Manufacturer Supplied Working Load Limit: 23,000 LBS each

SPECIFICATIONS

  • Replaceable Urethane contact pads avoid scratching or chipping pipe coating.
  • Two handles to adjust the chock according to the pipe load.
  • Two duplex nail holders to secure chock to skid or dunnage.
  • Anti-tipping brace on back of chock allowing it to be used to stage pipe securely on the ground.
  • Pipe chocks are powder coated in safety yellow or come in galvanized steel.
  • Two chock base styles available: one with flat base Extra Coarse Anti-Skid material to be used on wood deck or aluminum deck trailers. The other is a Serrated base to grip better in muddy or icy conditions.
  • All of Pipe Chocks’ product is manufactured with domestic A514(T-1) Carbon Steel, all parts are precision water-jet cut and assembled by an AWS certified welder.
  • Pipe Chocks' product is made in the USA.

PRICING

$1,000.00 USD per set of 4 Pipe Chocks

tax and additional fees not included in price

Contact us below for more details

CONTACT

For purchase details and more information,

contact us by phone or email!

Vernon Sauer

President

phone: 320-291-5944

Julie Sauer

Treasurer

phone: 320-291-3746

email:

pipechock@yahoo.com